B.Tech (Electrical & Electronics) Syllabus

Semester I & II

  • COURSE CODE
    COURSE NAME
    CREDITS
  • JEAS-103

    Engg Mathematics I:

    UNIT-I

    Differential Calculus-I: Leibnitz theorem, Partial differentiation, Eulers theorem, Curve tracing, Change of variables, Expansion of function of several variables.

    UNIT-II

    Differential Calculus-II Jacobian, approximation of errors, Extrema of functions of several variables, Lagrange’s method of multipliers (Simple applications).

    UNIT-III

    Matrices Elementary row and column transformation, Rank of matrix, Linear dependence, Consistency of linear system of equations and their solution, Characteristic equation, Caley-Hamilton theorem, Eigen values and Eigen vectors, Diagonalisation, Complex and unitary matrices, Application of matrices to engineering problems.

    UNIT-IV

    Multiple Integrals: Double and triple integral, Change of order, Change of variables, Beta and Gamma functions, Application to area, volume, Dirichlet integral and applications.

    UNIT-V

    Vector Calculus: Point function, Gradient, divergence and curl of a vector and their physical interpretations, Line, surface and volume integrals, Statement and problems of Green’s, Stoke’s and Gauss divergence theorems (without proof).

    Books:

    • 1. B.V.Ramana, Higher Engineering Mathmatics, Tata Mc Graw-Hill Publishing Company Ltd., 2008.
    • 2. R.K.Jain & S.R.K.Iyenger, Advance Engineering Mathematics, Narosa Publishing House, 2002.
    • 3. B.S.Grewal, Engineering Mathematics, Khanna Publishers, 2004.
    • 4. B.S.Grewal, Higher Engineering Mathematics, Khanna Publishers, 2005.
    • 5. E.Kreyszig, Advanced Engineering Mathematics, John Wiley & Sons, 2005.
    • 6. C.Ray Wylie & Louis C. Barrett, Advanced Engineering Mathematics, Tata Mc Graw-Hill Publishing Company Ltd. 2003
    • 7. Peter V. O’Neil, Advanced Engineering Mathematics, Thomson (Cengage) Learning.
    04
  • JEAS-101

    Engg Physics I:

    UNIT-I

    Relativistic Mechanics: Inertial & non-inertial frames, Michelson- Morley experiment, Einstein’s postulates. Lorentz transformation equations. Length contraction & Time dilation, Addition of velocities; Variation of mass with velocity Mass energy equivalence.

    UNIT-II

    Optics: Interference: Interference of light, Biprism experiment, displacement of fringes, Interference in thin films- wedge shaped film, Newton’s rings,

    UNIT-III

    Diffraction - Single, Double & N- Slit, Diffraction grating, Grating spectra, Rayleigh’s criterion and resolving power of grating.

    UNIT-IV

    Polarization- Phenomena of double refraction, Nicol prism, Production and analysis of plane, circular and elliptical polarized light, Fresnel’s theory of optical activity, Polarimeters .
    Laser: Spontaneous and stimulated emission of radiation, Einstein’s Coefficients, construction and working of Ruby, He-Ne lasers and laser applications.

    UNIT-V

    Fiber Optics and Holography Fundamental ideas about optical fiber, Types of fibers, Acceptance angle and cone, Numerical aperture, Propagation mechanism and communication in optical fiber. Attenuation, Signal loss in optical fiber and dispersion. Basic Principle of Holography, Construction and reconstruction of Image on hologram and applications of holography.

    Books:

    • 1. Concepts of Modern Physics - Aurthur Beiser (Mc-Graw Hill)
    • 2. Introduction to Special theory of Relativity-Robert ResnickWiely
    • 3. Optics - Ajoy Ghatak (TMH) Brijlal & Subramanian (S.Chand )
    • 4. Optical Fibre & Laser - Anuradha De. ( New Age )
    • 5. Fundamental of Physics - Resnick, Halliday & Walker (Wiely )
    • 6. Principles of Physics - R.A. Serway & J.W. Jewett
    04
  • JEAS-102/JEAS-202

    Engg Chemistry:

    UNIT-I

    Chemical Bonding And States Of Matter: M.O. theory and its applications in diatonic molecules. Hydrogen bond, metallic bond and their applications. Various states of matter including liquid crystallite state, classification and applications of liquid crystals. Types of unit cell, space lattice (only cubes, Bragg’s Law. Calculation and density of the unit cell, one and two dimensional solids such as graphite and its conduction properties. Fullerenes and their applications.

    UNIT-II

    Reaction Kinetics, Phase Rule And Electrochemistry: Order and molecularity of reactions, Zero order, first order and second order reactions. Integrated rate equations. Theories of reaction rates. Phase rule and its applications to one component system (water). Equilibrium potential, electrochemical cells, galvanic and concentration cells, electrochemical theory of corrosion and protection of corrosion. Fuel cells.

    UNIT-III

    Structural And Mechanistic Concepts Of Organics: Inductive, electromeric mesomeric and hyperconjugative effects. Stability of reaction intermediates e.g. carbocation and free radicals. Mechanism of nucleophilic substitutions. Mechanism of the following reactions:

    • a) Aldol condensation
    • b) Cannizaro reaction
    • c) Beckman rearrangement
    • d) Hoffmann rearrangement and
    • e) Diels-Alder reaction.

    E-Z nomenclature, R.S. configuration, optical isomerism, chirality and its implications, conformations of butene.

    UNIT-IV

    Polymers And Organometallics Polymerization and its classification. Thermoplastic and Thermosetting resins. Eleastomers and synthetic fibres. Ion exchange resins. Organic conducting and biodegradable polymers. Classification and general methods of synthesis of organics and their applications in polymerizations and catalysis.

    UNIT-V

    Analytical Methods And Fuels Titrimetric analysis with reference to acid-base, redox, precipitations and complexometric titrations. Elementary ideas and simple applications of u.v., visible, infra-red and HNMR spectral techniques. Water treatment methods for boiler feed water by calgon process, zeolites and ion-exchange resins. Classification of fuels. Analysis of coal, determination of colorific values. Biomass and biogas.

    Books:

    • 1. Advanced Inorganic Chemistry, by Cotton, F.A., Wilkinson G., Murrillo, C.A. and Bochmann, Wiley, ehichester, 1999.
    • 2. March’s Advanced Organic Chemistry: Reactions, Mechanisms and Structure Smith, Michael B./March, Jerry, John Willey & sons, 6th Edition, 2007.
    • 3. Elements of Physical Chemistry, Glasstonne, Samuel B. ELBS, 2005.
    • 4. Organic Chemistry, Finar, I.L.: Addision – Wesley Longman, Limited, 2004.
    • 5. Text Book of Polymer Science by F.W. Billmeyer, John Wiley & sons, 1994.
    • 6. Liquid Crystals and Plastic Crystals, vol.-I, edited by G.W. Gray and P.A. Winsor, Ellis Harwood Series in Physical Chemistry, New York.
    • 7. Corrosion Engineering by M.G. Fontana McGraw Hill Publications
    04
  • JEME-101/ JEME-201

    Engineering Mechanics:

    UNIT-I

    Two Dimensional Force Systems: Basic concepts, Laws of motion, Principle of Transmissibility of forces, Transfer of a force to parallel position , Resultant of a force system, Simplest Resultant of Two dimensional concurrent and Non-concurrent Force systems, Distributed force system, Free body diagrams, Equilibrium and Equations of Equilibrium, Applications. Friction: Introduction, Laws of Coulomb Friction, Equilibrium of Bodies involving Dry-friction, Belt friction, Application.

    UNIT-II

    Beam: Introduction, Shear force and Bending Moment, Differential Equations for Equilibrium, Shear force and Bending Moment Diagrams for Statically Determinate Beams. Trusses: Introduction, Simple Truss and Solution of Simple truss, Method f Joints and Method of Sections.

    UNIT-III

    Centroid and Moment of Inertia: Centroid of plane, curve, area, volume and composite bodies, Moment of inertia of plane area, Parallel Axes Theorem, Perpendicular axes theorems, Principal Moment Inertia, Mass Moment of Inertia of Circular Ring, Disc, Cylinder, Sphere and Cone about their Axis of Symmetry.

    UNIT-IV

    Kinematics of Rigid Body: Introduction, Plane Motion of Rigid Body, Velocity and Acceleration under Translation and Rotational Motion, Relative Velocity. Kinetics of Rigid Body: Introduction, Force, Mass and Acceleration, Work and Energy, Impulse and Momentum, D’Alembert’s Principles and Dynamic Equilibrium

    UNIT-V

    Simple Stress and Strain: Introduction, Normal and Shear stresses, Stress- Strain Diagrams for ductile and brittle material, Elastic Constants, One Dimensional Loading of members of varying cross-sections, Strain energy.
    Pure Bending of Beams: Introduction, Simple Bending Theory, Stress in beams of different cross sections.
    Torsion: Introduction, Torsion of shafts of circular section, torque and twist, shear stress due to torque.

    Books:

    • 1. Engineering Mechanics by Irving H. Shames, Prentice-Hall
    • 2. Mechanics of Solids by Abdul Mubeen, Pearson Education Asia.
    • 3. Mechanics of Materials by E.P.Popov, Prentice Hall of India
    04
  • JEEE-101/JEEE-201

    Electrical Engineering:

    UNIT-I

    DC Circuit Analysis and Network Theorems – Circuit concepts: Concepts of network, Active and passive elements, voltage and current sources, concept of linearity and linear network, unilateral and bilateral elements, R, L and C as linear elements, source transformation. Kirchhoff’s laws; loop and nodal methods of analysis; star-delta transformation; Network Theorems: Superposition Theorem, Thevenin’s Theorem, Norton’s Theorem, Maximum Power Transfer Theorem (simple numerical problems).

    UNIT-II

    Steady-State Analysis of Single Phase AC Circuits – AC Fundamentals: Sinusoidal, square and triangular waveforms – average and effective values, form and peak factors, concepts of phasor, phasor representation of sinusoidally varying voltage and current. Analysis of series, parallel and series-parallel RLC Circuits: apparent, active and reactive powers, power factor, causes and problems of low power factor, power factor improvement; resonance in series and parallel circuits, bandwidth and (simple numerical problems).

    UNIT-III

    Three Phase AC Circuits – Three phase system – its necessity and advantages, meaning of phase sequence, star and delta connections, balanced supply and balanced load, line and phase voltage/current relations, three-phase power and its measurement (simple numerical problems).
    Measuring Instruments – Types of instruments, construction and working principles of PMMC and moving iron type voltmeters & ammeters, single phase dynamometer wattmeter and induction type energy meter.

    UNIT-IV

    Introduction to Power System: General layout of electrical power system and functions of its elements, standard transmission and distribution voltages, concepts of grid (elementary treatment only).
    Magnetic Circuit: Magnetic circuit concepts, analogy between electric and magnetic circuits, magnetic circuits with DC and AC excitations, magnetic leakage, B-H curve, hysteresis and eddy current losses, magnetic circuit calculations.
    Single Phase Transformer: Principle of operation, construction, e.m.f. equation, equivalent circuit, power losses, efficiency (simple numerical problems),

    UNIT-V

    Electrical Machines: Principles of electro mechanical energy conversion. DC machines: types, e.m.f. equation of generator and torque equation of motor, characteristics and applications of dc motors (simple numerical problems).
    Three Phase Induction Motor: Types, principle of operation, torque equation, slip-torque characteristics, applications (simple numerical problems related to slip only).
    Single Phase Induction Motor: Principle of operation and introduction to methods of starting, applications.
    Three Phase Synchronous Machines: Principle of operation of alternator and synchronous motor and their applications.

    Books:

    • 1. V. Del Toro, “Principles of Electrical Engineering” Prentice Hall International
    • 2. I.J. Nagarath, “Basic Electrical Engineering” Tata McGraw Hill
    • 3. D.E. Fitzgerald & A. Grabel Higginbotham, “Basic Electrical Engineering” McGraw Hill
    • 4. Edward Hughes, “Electrical Technology” Longman
    • 5. T.K. Nagsarkar & M.S. Sukhija, “Basic Electrical Engineering” O U Press
    • 6. H. Cotton, “Advanced Electrical Technology” Wheeler Publishing
    • 7. W.H. Hayt & J.E. Kennely, “Engineering Circuit Analysis” McGraw Hill
    04
  • JEEC-101/ JEEC-201

    Electronics Engineering:

    UNIT-I

    Semiconductors: Materials, semiconductor diode, diode resistance, diode capacitance.
    Diode Applications: Load line Analysis, Series diode configurations, parallel & series parallel configurations, Rectification using diode, clippers, clampers, Zener diode with its applications.

    UNIT-II

    Bipolar Junction Transistor: Introduction, Transistor Construction, Operation, CB, CE, CC configuration, Transistor Amplifying action, Limits of Operation.
    DC Biasing: BJT’s Operating Point, fixed, emitter, voltage divider bias configurations.
    BJT AC analysis for CE configuration: The re model, fixed bias, voltage divider bias, emitter bias configuration, emitter follower configuration.

    UNIT-III

    Field Effect Transistor: JFET and its characteristics, Depletion MOSFET, Enhancement MOSFET.
    FET Biasing: Common Source-Fixed bias, Self Bias, Voltage Divider Bias Configurations.
    FET Amplifiers: JFET small signal model, Fixed bias configuration, Self bias configuration, Voltage divider configuration.

    UNIT-IV

    Operational Amplifier: Op-amp Basics, Practical Op-amp Circuits, DC offset parameters, frequency parameters, Differential Mode & Common Mode Operation. Electronic Instruments: Digital Voltmeter, Digital Multimeter, Cathode Ray Oscilloscope, Measurement using CRO.

    UNIT-V

    Digital Electronics: Binary, Hexadecimal, Octal & Decimal Number Representation, Conversion of different bases into base-n, Subtraction through complement method.
    Boolean Algebra: Logic expression minimization, Logic Gates, Universal Gates, Canonical forms minimization using K-map (2, 3, 4 variable), Introduction to combinational circuits (adder, Subtractor), difference between combinational & sequential circuits.

    Books:

    • 1. Robert L. Boylestad, “Electronic Devices and Circuit Theory”, Pearson
    • 2. H S Kalsi, “Electronics Instrumentation” TMH
    • 3. M Morris Mano, “Digital Design” PHI
    • 4. Debashish De, “Basic Electronics” Pearson
    • 5. Malvino, “Electronic Principles”
    • 6. Niel Storey, “Electronics: A systems Approach” Pearson
    • 7. Sedra-Smith, “Microelectronic Circuits” Oxford University Press
    • 8. Hill & Peterson, “Switching Circuit & Logic Design”, Wiley
    • 9. David A Bell, “Electronic Instrumentation & Measurement” 2nd Edition, PHI
    04
  • JECS-101/ JECS-201

    Computer Concepts and programming in C:

    UNIT-I

    Basics of Computer: Introduction to digital computer, basic operations of computer, functional components of computer, Classification of computers. Introduction to operating system: [DOS, Windows, Linux and Android] purpose, function, services and types. Basics of programming: Approaches to Problem Solving, Concept of algorithm and flow charts, Types of computer languages:- Machine Language, Assembly Language and High Level Language, Concept of Assembler, Compiler, Loader and Linker.

    UNIT-II

    Standard I/O in C, Fundamental data types- Character type, integer, short, long, unsigned, single and double floating point, Storage classes- automatic, register, static and external, Operators and expression using numeric and relational operators, mixed operands, type conversion, logical operators, bit operations, assignment operator, operator precedence and associativity. Fundamentals of C programming: Structure of C program, writing and executing the first C program, components of C language. Standard I/O in C.

    UNIT-III

    Conditional program execution: Applying if and switch statements, nesting if and else, use of break and default with switch, program loops and iterations: use of while, do while and for loops, multiple loop variables, use of break and continue statements.
    Functions: Introduction, types of functions, functions with array, passing values to functions, recursive functions.

    UNIT-IV

    Arrays: Array notation and representation, manipulating array elements, using multi dimensional arrays. Structure, union, enumerated data types.

    UNIT-V

    Pointers: Introduction, declaration, applications File handling, standard C preprocessors, defining and calling macros, conditional compilation, passing values to the compiler

    Books:

    • 1. Problem Solving and Program Design in C, by Jeri R. Hanly, Elliot B. Koffman, Pearson Addison-Wesley, 2006.
    • 2. Computer Science- A Structured Programming Approach Using C, by Behrouz A. Forouzan, Richard F. Gilberg, Thomson, Third Edition [India Edition], 2007.
    04
  • JEAS-104/JEAS-204

    Professional Communication:

    UNIT-I

    Basics of Technical Communication Technical Communication: features; Distinction between General and Technical communication; Language as a tool of communication; Levels of communication: Interpersonal, Organizational, Mass communication; The flow of Communication: Downward, Upward, Lateral or Horizontal (Peer group); Importance of technical communication; Barriers to Communication.

    UNIT-II

    Constituents of Technical Written Communication Words and Phrases: Word formation. Synonyms and Antonyms; Homophones; Select vocabulary of about 500-1000 New words; Requisites of Sentence Construction: Paragraph Development: Techniques and Methods -Inductive, Deductive, Spatial, Linear, Chronological etc; The Art of Condensation- various steps.

    UNIT-III

    Forms of Technical Communication Business Letters: Sales and Credit letters; Letter of Enquiry; Letter of Quotation, Order, Claim and Adjustment Letters; Job application and Resumes. Official Letters: D.O. Letters; Govt. Letters, Letters to Authorities etc. Reports: Types; Significance; Structure, Style & Writing of Reports. Technical Proposal; Parts; Types; Writing of Proposal; Significance. Technical Paper, Project. Dissertation and Thesis Writing: Features, Methods & Writing.

    UNIT-IV

    Presentation Strategies Defining Purpose; Audience & Locale; Organizing Contents; Preparing Outline; Audio-visual Aids; Nuances of Delivery; Body Language; Space; Setting Nuances of Voice Dynamics; Time- Dimension.

    UNIT-V

    Value- Based Text Readings Following essays form the suggested text book with emphasis on Mechanics of writing,

    • a) The Aims of Science and the Humanities by M.E. Prior
    • b) The Language of Literature and Science by A.Huxley
    • c) Man and Nature by J.Bronowski
    • d) The Mother of the Sciences by A.J.Bahm
    • e) Science and Survival by Barry Commoner
    • f) Humanistic and Scientific Approaches to Human Activity by Moody E. Prior
    • g) The Effect of Scientific Temper on Man by Bertrand Russell.

    Books:

    • 1. Improve Your Writing ed. V.N. Arora and Laxmi Chandra, Oxford Univ. Press, New Delhi
    • 2. Technical Communication – Principles and Practices by Meenakshi Raman & Sangeeta Sharma, Oxford Univ. Press 2007, New Delhi.
    • 3. Effective Technical Communication by Barun K. Mitra, Oxford Univ. Press.
    • 4. Business Correspondence and Report Writing by Prof. R.C. Sharma & Krishna Mohan, Tata McGraw Hill & Co. Ltd., New Delhi.
    • 5. How to Build Better Vocabulary by M.Rosen Blum, Bloomsbury Pub. London.
    • 6. Word Power Made Easy by Norman Lewis, W.R.Goyal Pub. & Distributors.
    • 7. Developing Communication Skills by Krishna Mohan, Meera Banerji- Macmillan India Ltd. Delhi.
    • 8. Manual of Practical Communication by L.U.B. Pandey & R.P. Singh; A.I.T.B.S. Publications India Ltd.; Krishan Nagar, Delhi.
    04
  • JEAS-151/JEAS-251

    Engg Physics Lab:

    List of Experiments

    Any ten experiments, at least four from each group:


    Group-A

    • 01. To determine the wavelength of monochromatic light by Newton’s ring.
    • 02. To determine the wavelength of monochromatic light with the help of Fresnel’s biprism.
    • 03. To determine the focal length of two lenses by nodal slide and locate the position of cardinal points.
    • 04. To determine the specific rotation of cane sugar solution using polarimeter.
    • 05. To determine the wavelength of spectral lines using plane transmission grating.
    • 06. To study the polarization of light by simple reflection using laser.
    • 07. Measurement of Wavelength of a laser (He- Ne) light using single slit diffraction.

    Group-B

    • 01. To determine the specific resistance of a given wire using Carey Foster’s bridge.
    • 02. To study the variation of magnetic field along the axis of current carrying - Circular coil and then to estimate the radius of the coil.
    • 03. To verify Stefan’s Law by electrical method.
    • 04. To calibrate the given ammeter and voltmeter by potentiometer.
    • 05. To study the Hall effect and determine Hall coefficient, carrier density and - mobility of a given semiconductor using Hall effect set up.
    • 06. To determine the energy band gap of a given semiconductor material.
    • 07. To determine E.C.E. of copper using Tangent or Helmholtz galvanometer.
    • 08. To draw hysteresis curve of a given sample of ferromagnetic material and from - this to determine magnetic susceptibility and permeability of the given specimen.
    • 09. To determine the ballistic constant of a ballistic galvanometer.
    • 10. To determine the coefficient of viscosity of a liquid.
    • 11. Measurement of fiber attenuation and aperture of fiber.
    • 12. High resistance by leakage method.
    • 13. Magnetic Susceptibility of paramagnetic solution
    02
  • JEAS-152/JEAS-252

    Engg Chemistry Lab:

    List of Experiments


    Group-A

    • 01. Determination of alkalinity in the given water sample.
    • 02. Determination of temporary and permanent hardness in water sample using EDTA as standard solution.
    • 03. Determination of available chlorine in bleaching powder.
    • 04. Determination of chloride content in bleaching powder.
    • 05. Determination of iron content in the given water sample by Mohr’s methods.
    • 06. pH-metric titration.
    • 07. Determination of Equivalent weight of iron by the chemical displacement method. The equivalent weight of copper is 63.5.
    • 08. Viscosity of an addition polymer like polyester by Viscometer.
    • 09. Determination of iron concentration in sample of water by colorimetric method. The method involves the use of KSCN as a colour developing agent and the measurements are carried out at λmax 480nm.
    • 10. Element detection and functional group identification in organic compounds.
    • 11. Preparation of Bakelite resin.
    02
  • JEME-151/JEME-251

    Engg Mechanics Lab:

    (Any 10 experiments of the following)


    • 01. To conduct the tensile test and determine the ultimate tensile strength, percentage elongation for a steel specimen.
    • 02. To determine the compression test and determine the ultimate compressive strength for a specimen.
    • 03. To conduct the Impact-tests (Izod/Charpy) on Impact-testing machine to find the toughness.
    • 04. To determine the hardness of the given specimen using Vicker/Brinell/Rockwell hardness testing machine.
    • 05. To study the slider-crank mechanism etc. of 2-stroke & 4-stroke I.C. Engine models.
    • 06. Friction experiment(s) on inclined plane and/or on screw-jack.
    • 07. Simple & compound gear-train experiment.
    • 08. Worm & worm-wheel experiment for load lifting.
    • 09. Belt-Pulley experiment.
    • 10. Bending of simply-supported and cantilever beams for theoretical & experimental deflection.
    • 11. Torsion of rod/wire experiment.
    • 12. Experiment on Trusses.
    • 13. Statics experiment on equilibrium
    • 14. Dynamics experiment on momentum conservation
    • 15. Dynamics experiment on collision for determining coefficient of restitution.
    • 16. Experiment on Moment of Inertia.
    02
  • JEEE-151/JEEE-251

    Electrical Engg Lab:

    List of Experiments

    Note: A minimum of 10 experiments from the following should be performed

    • 01. Verification of Kirchhoff’s Laws
    • 02. Verification of
      • a) Superposition Theorem
      • b) Thevenin’s Theorem
      • c) Maximum Power Transfer Theorem
    • 03. Measurement of power and power factor in a single phase ac series inductive circuit and study improvement of power factor using capacitor.
    • 04. Study of phenomenon of resonance in RLC series circuit and obtain resonant frequency.
    • 05. Measurement of power in 3-phase circuit by two wattmeter method and determination of its power factor.
    • 06. Determination of parameters of ac single phase series RLC circuit.
    • 07. Determination of
      • a) Voltage ratio
      • b) Polarity and
      • c) Efficiency by load test of a single test of a single phase transformer.
    • 08. To study speed control of dc shunt motor using
      • a) Armature voltage control
      • b) Field flux control
    • 09. Determination of efficiency of a dc shunt motor by load test.
    • 10. To study running and speed traversal of a three phase induction motor and record speed in both directions.
    • 11. To measure energy by a single phase energy meter and determine error.
    • 12. To study P-N diode characteristics.
    • 13. To study full wave and half wave rectifier circuits with and without capacitor and determine ripple factors.
    • 14. To study Operational Amplifier as Adder and Subtractor.
    • 15. To study transistor as a switch.
    02
  • JECS-151/JECS-251

    C Programming Lab:

    • 01. WAP that accepts the marks of 5 subjects and finds the sum and percentage marks obtained by the student.
    • 02. WAP that calculates the Simple Interest and Compound Interest. The Principal, Amount, Rate of Interest and Time are entered through the keyboard.
    • 03. WAP to calculate the area and circumference of a circle.
    • 04. WAP that accepts the temperature in Centigrade and converts into Fahrenheit using the formula
      C/5 = (F-32)/9.
    • 05. WAP that swaps values of two variables using a third variable.
    • 06. WAP that checks whether the two numbers entered by the user are equal or not.
    • 07. WAP to find the greatest of three numbers.
    • 08. WAP that finds whether a given number is even or odd.
    • 09. WAP that tells whether a given year is a leap year or not.
    • 10. WAP that accepts marks of five subjects and finds percentage and prints grades according to the following criteria:
      • Between 90-100%--------------Print ‘A’
      • 80-90%-----------------------Print ‘B’
      • 60-80%-----------------------Print ‘C’
      • Below 60%--------------------Print ‘D’
    • 11. WAP that takes two operands and one operator from the user and perform the operation and prints the result by using Switch statement.
    • 12. WAP to print the sum of all numbers up to a given number.
    • 13. WAP to find the factorial of a given number.
    • 14. WAP to print sum of even and odd numbers from 1 to N numbers.
    • 15. WAP to print the Fibonacci series.
    • 16. WAP to check whether the entered number is prime or not.
    • 17. WAP to find the sum of digits of the entered number.
    • 18. WAP to find the reverse of a number.
    • 19. WAP to print Armstrong numbers from 1 to 100.
    • 20. WAP to convert binary number into decimal number and vice versa.
    • 21. WAP that simply takes elements of the array from the user and finds the sum of these elements.
    • 22. WAP that inputs two arrays and saves sum of corresponding elements of these arrays in a third array and prints them.
    • 23. WAP to find the minimum and maximum element of the array.
    • 24. WAP to search an element in a array using Linear Search.
    • 25. WAP to sort the elements of the array in ascending order using Bubble Sort technique.
    • 26. WAP to add and multiply two matrices of order nxn.
    • 27. WAP that finds the sum of diagonal elements of a mxn matrix.
    • 28. WAP to implement strlen(), strcat(), strcpy() using the concept of Functions.
    02
  • JEAS-154/JEAS-254

    Professional Communication Lab:

    Interactive and Communicative Practical with emphasis on Oral Presentation/Spoken Communication based on International Phonetic Alphabets (I.P.A.)

    List of Practical:

    • 01. Group Discussion: Practical based on Accurate and Current Grammatical Patterns.
    • 02. Conversational Skills for Interviews under suitable Professional Communication Lab conditions with emphasis on Kinesics.
    • 03. Communication Skills for Seminars/Conferences/Workshops with emphasis on Paralinguistics/Kinesics.
    • 04. Presentation Skills for Technical Paper/Project Reports/ Professional Reports based on proper Stress and Intonation Mechanics.
    • 05. Official/Public Speaking based on suitable Rhythmic Patterns.
    • 06. Theme- Presentation/ Key-Note Presentation based on correct argumentation methodologies.
    • 07. Individual Speech Delivery/Conferences with skills to defend Interjections/Quizzes.
    • 08. Argumentative Skills/Role Play Presentation with Stress and Intonation.
    • 09. Comprehension Skills based on Reading and Listening Practicals on a model Audio-Visual Usage.

    Books

    • 1. Bansal R.K. & Harrison: Phonetics in English, Orient Longman, New Delhi.
    • 2. Sethi & Dhamija: A Course in Phonetics and Spoken English, Prentice Hall.
    • 3. L.U.B.Pandey & R.P.Singh, A Manual of Practical Communication, A.I.T.B.S. Pub. India Ltd. Krishan Nagar, Delhi.
    • 4. Joans Daniel, English Pronouncing Dictionary, Cambridge Univ. Press.
    02
  • JEME-152/ JEME-252

    Workshop practice:

    • 01. Carpentry Shop:
      • a) Study of tools & operations and carpentry joints.
      • b) Simple exercise using jack plane.
      • c) To prepare half-lap corner joint, mortise & tennon joints.
      • d) Simple exercise on woodworking lathe.
    • 02. Fitting Bench Working Shop:
      • a) Study of tools & operations
      • b) Simple exercises involving fitting work.
      • c) Perfect male-female joint.
      • d) Simple exercises involving drilling/tapping/dieing.
    • 3. Black Smithy Shop:
      • a) Study of tools & operations
      • b) Simple exercises base on black smithy operations such as upsetting, drawing down, punching, bending, fullering & swaging.
    • 04. Welding Shop:
      • a) Study of tools & operations of Gas welding & Arc welding
      • b) Simple butt and Lap welded joints.
      • c) Oxy-acetylene flame cutting.
    • 05. Sheet-metal Shop:
      • a) Study of tools & operations.
      • b) Making Funnel complete with ‘soldering’.
      • c) Fabrication of tool-box, tray, electric panel box etc.
    • 06. Machine Shop:
      • a) Study of machine tools and operations.
      • b) Plane turning.
      • c) Step turning
      • d) Taper turning.
      • e) Threading
      • f) Single point cutting tool grinding.
    • 07. Foundry Shop:
      • a) Study of tools & operations
      • b) Pattern making.
      • c) Mould making with the use of a core.
      • d) Casting
    02
  • JECE-151/JECE-251

    Engg Graphics Lab:

    1. Introduction to Computer Aided Sketching

    Introduction, Drawing Instruments and their uses, BIS conventions, lettering Dimensioning and free hand practicing. Computer screen, layout of the software, standard tool bar/menus and description of most commonly used tool bars, navigational tools. Coordinate system and reference planes. Definitions of HP, VP, RPP & LPP. Creation of 2D/3D environment. Selection of drawing size and scale. Commands and creation of Lines, Co-ordinate points, axes, poly-lines, square, rectangle, polygons, splines, circles, ellipse, text, move, copy, off-set, mirror, rotate, trim, extend, break, chamfer, fillet, curves, constraints viz. tangency, parallelism, inclination and perpendicularity. Dimensioning, line convention, material conventions and lettering. 2-Sheet

    2. Orthographic Projections

    Introduction, Definitions- Planes of projection, reference line and conventions employed, Projections of points in all the four quadrants, Projections of straight lines (located in First quadrant/first angle only), True and apparent lengths, True and apparent inclinations to reference planes (No application problems). 2-Sheet

    3. Orthographic Projections of Plane Surfaces

    (First Angle Projection Only)
    Introduction, Definitions-projections of plane surfaces-triangle, square rectangle, rhombus, pentagon, hexagon and circle, planes in different positions by change of position method only (No problems on punched plates and composite plates.) 1-Sheet

    4. Projections of Solids (First Angle Projection Only)

    Introduction, Definitions- Projections of right regular- tetrahedron, hexahedron (cube), prisms, pyramids, cylinders and cones in different positions. (No problems on octahedrons and combination solid) 2-Sheet

    5. Sections and Development of Lateral Surfaces of Solids

    Introduction, Section planes, Sections, section views, Sectional views, apparent shapes and True shapes of Sections of right regular prisms, pyramids, cylinders and cones resting with base on HP. (No problems on section of solids) 1-Sheet Development of lateral surface of above solids, their frustums and truncations. (No problems on lateral surfaces of trays, Tetrahedrons spheres and transition pieces).

    6. Isometric Projection (Using Isometric Scale Only)

    Introduction, Isometric scale, Isometric Projection of simple plane figures, Isometric Projection of tetrahedron, hexahedron (cube), right regular prisms, pyramids, cylinders, cones, spheres, cut spheres and combination of solids (Maximum of three Solids). 1-Sheet

    Note: At least 3 drawing assignments must be on AUTOCAD.

    Books:

    • 1. Engineering Drawing – N.D. Bhatt & V.M. Panchal, 48th edition, 2005 Charotar Publishing House, Gujarat.
    • 2. A Primer on Computer Aided Engineering Drawing-2006, Published by VTU, Belgaum.
    • 3. Computer Aided Engineering Drawing – S. Trymbaka Murthy, - I.K. International Publishing House Pvt. Ltd., New Delhi, 3rd revised edition-2006.
    • 4. Engineering Graphics – K.R. Gopalakrishna, 32nd edition, 2005 – Subash Publishers Bangalore.
    • 5. Fundamentals of Engineering Drawing with an Introduction to Interactive Computer Graphics for Design and Production – Luzadder Warren J., duff John M., Eastern Economy Edition, 2005 – Prentice- Hall of India Pvt. Ltd., New Delhi.
    02
  • JEAS-203

    Engg Mathematics II:

    UNIT-I

    Differential Equations: Linear differential equations of nth order with constant coefficients, Complementary functions and particular integrals, Simultaneous linear differential equations, Solution of second order differential equation by changing dependent and independent variables, Method of variation of parameters, Applications to engineering problems (without derivation).

    UNIT-II

    Series Solution and Special Functions:Series solution of ordinary differential equations of 2nd order with variable coefficients (Frobenius Method), Bessel and Legendre equations and their series solutions, Properties of Bessel functions and Legendre polynomials.

    UNIT-III

    Laplace Transform: Laplace transform, Existence theorem, Laplace transform of derivatives and integrals, Inverse Laplace transform, Unit step function, Dirac delta function, Laplace transform of periodic functions, Convolution theorem, Application to solve simple linear and simultaneous differential equations.

    UNIT-IV

    Fourier Series and Partial Differential Equations: Periodic functions, Trignometric series, Fourier series of period 2π , Eulers formulae, Functions having arbitrary period, Change of interval, Even and odd functions, Half range sine and cosine series, Harmonic analysis. Solution of first order Lagrange’s linear partial differential equatins, Linear partial differential equations with constant coefficients of 2nd order and their classifications - parabolic, elliptic and hyperbolic with illustrative examples.

    UNIT-V

    Applications of Partial Differential Equations: Method of separation of variables for solving partial differential equations, Wave equation up to two-dimensions, Laplace equation in two-dimensions, Heat conduction equations up to two-dimensions, Equations of transmission lines.

    Books:

    • 1. B.V.Ramana, Higher Engineering Mathmatics, Tata Mc Graw-Hill Publishing Company Ltd., 2008.
    • 2. R.K.Jain & S.R.K.Iyenger, Advance Engineering Mathematics, Narosa Publishing House, 2002.
    • 3. B.S.Grewal, Engineering Mathematics, Khanna Publishers, 2004.
    • 4. B.S.Grewal, Higher Engineering Mathematics, Khanna Publishers, 2005.
    • 5. E.Kreyszig, Advanced Engineering Mathematics, John Wiley & Sons, 2005.
    • 6. C.Ray Wylie & Louis C. Barrett, Advanced Engineering Mathematics, Tata Mc Graw-Hill Publishing Company Ltd. 2003
    • 7. Peter V. O’Neil, Advanced Engineering Mathematics, Thomson (Cengage) Learning, 2007.
    • 8. G.F.Simmons, Differential Euations, Tata Mc Graw-Hill Publishing Company Ltd. 1981.
    • 9. Chandrika Prasad, Advanced Mathematic for Engineers, Prasad Mudranalaya, 1996.
    04
  • JEAS-201

    Engg Physics II:

    UNIT-I

    Wave Mechanics and X-ray Diffraction Wave- particle duality, de-Broglie matter waves, Phase and Group velocities, Davisson-Germer experiment, Heisenberg uncertainty principle and its applications, Wave function and its significance, Schrödinger’s wave equation – particle in one dimensional box. Diffraction of X-rays by crystal planes, Bragg’s spectrometer, Compton’s effect.

    UNIT-II

    Dielectric and Magnetic Properties of Materials: Dielectric constant and Polarization of dielectric materials, Types of Polarization (Polarizability). Equation of internal fields in liquid and solid ( One- Dimensional), Claussius Mussoti- Equation, Ferro and Piezo electricity (Qualitative), Frequency dependence of dielectric constant, Dielectric Losses, Important applications of dielectric material, Langevin’s theory for dia and paramagnetic material, Phenomena of hysteresis and its applications. Ultrasonic: Generation, detection and application of ultrasonics.

    UNIT-III

    Electromagnetics Displacement Current, Maxwell’s Equations (Integral and Differential Forms). Equation of continuity, EM- Wave equation and its propagation characteristics in free space and in conducting media, Poynting theorem and Poynting vectors.

    UNIT-IV

    Superconductivity: Temperature dependence of resistivity in superconducting materials, Effect of magnetic field (Meissner effect), Type I and Type II superconductors, Temperature dependence of critical field, BCS theory (Qualitative), High temperature superconductors. Characteristics of superconductors in superconducting state, Applications of Super-conductors.

    UNIT-V

    Introduction to Nanomaterials- Basic principle of nanoscience and technology, creation and use of buckyballs, structure, properties and uses of Carbon nanotubes, Applications of nanotechnology.

    Books:

    • 1. Concept of Modern Physics - by Beiser (Tata Mc-Graw Hill)
    • 2. Solid State Physics - by C. Kittel, 7th Edition (Wiley Eastern)
    • 3. Materials Science and - by V. Raghavan (Prentice- Hall India) Engineering
    • 4. Solid State Physics - by S.O. Pillai, 5th edition (New Age International )
    • 5. Nanotechnology - by Rechard Booker and Earl Boysen (Wiley Publishing )
    • 6. Introduction to - by David J. Griffith (PH I) Electrodynamics
    04
  • JGP-101/ JGP-201

    General Proficiency

    02
  • Total Credits
    30 + 30
    60